top of page

151 B-Grade: Instead of a spacing of 27mm between the heel riser inserts on Freeride Split 151, they have a spacing of 25,5mm. Freeride Split 151 is compatible with Plum and Union bindings and Voile Tour STS or Phantom Rocket heel risers for hardboots.
For Spark Arc or Surge, the hole farthest to the back on the heel rest would have to be extended by 1,5mm in order to fit properly.


For 2022/23, the board has been reshaped for improved response at lower speeds without losing the high-speed stability Furberg is known for, making it our most versatile splitboard to date.


The Furberg Freeride splitboard was developed to tackle any kind of snow and terrain you might find in the backcountry.


Furberg has shortened the sidecut radius to work better in all conditions; still long enough for high speed freeriding, but slightly shorter than previous years to make the board more reactive. Also all rocker and reverse sidecut transitions have been tweaked for an even smoother ride.

High-speed stability in combination with maneuverable and catch free properties has made the Freeride Split one of the most talked about splitboards of the last years. Its long sidecut radius makes the splitboard calm and forgiving, while rocker and reverse sidecut towards the tips make it float outstanding in powder and stay catch free in any situation.

Furberg Freeride Splitboard

  • New for 23-24

    - Blunt nose and tail for a shorter overall length compared to its effective edge.

    - Slightly longer effective edge and camber section for improved pop and a more reactive ride feel.

    - Equipped with top mount Spark R&D Fixie Clips, eliminating screw heads on the base.
    - Extra heel riser inserts for better hardboot compatibility.

    - Shorter radius (still slightly longer than most boards on the market) makes it more forgiving and playful.

    - Updated ash/poplar/paulownia wood core for an optimal balance between weight and durability.

    -Splitboards have extra heel riser inserts. This makes it possible to use hardboots with standard Voile heel risers on our splitboards or Spark Dual Height Climbing Wires without the adapter. This option is 20-50g lighter than any of the hardboot specific heel risers on the market.

    -Rounded corners of the Freeride Split improve durability and prevent the nose from catching the wall of the skin track when touring.

    Locking Inside Edge-Technology

    A tongue and groove system has been developed eliminating the movement between the board halves. The new splitboard locking Edge-Technology assembles like a regular splitboard and rides like your solid snowboard.  Gone is the lack of response that splitboards have suffered from. Comes with a custom ice scraper that can be used to easily clean both board halves and bindings from snow and ice comes along with the splitboard. While not needed most of the time, this is a great tool to have for the conditions where snow tends to stick to the board.

    Slightly Shorter Turning Radius

    Furberg made the turning radius slightly shorter than the first generation boards to make the snowboards more responsive and playful on hardpack. But don’t worry, the boards still have approximately a 70 % longer turning radius than the average freeride board.

    Low Camber

    The best compromise between the flotation of full rocker, responsiveness and grip of camber help achieve even better all conditions edge-hold, more responsive behavior, and greater grip while skinning.

    Longer Rocker and Reverse Sidecut Radii

    Allows Furberg snowboards to be even more catch free and to maintain direction better when on edge more than before.

    Longer and Higher Nose

    Increases flotation and makes the board slide over irregularities in the snowpack with less resistance. The rounded corners of the Freeride Split improve durability and prevent the nose from catching the wall of the skin track when touring.

bottom of page